هیچ محصولی وجود ندارد
شناسه سفارش خود را وارد کنید
نمونه شناسه سفارش : 42602
محصولات بازدید شده
به همراه تست قبل از ارسال
آکبند و به همراه 7 روز مهلت تست تعویض
SPECIFICATION
MECHANICAL |
|
Diagonal Size | 17 inch |
Outline Dimension | 382.0W x 314.0H mm |
View Area | 340.0W x 272.0H mm |
Touch Points | 10 point |
Minimum Identification Diameter | 7*7mm |
Line Spacing | 14mm |
Touch Accuracy | Middle area is less than 1mm, edge is less than 3mm |
Support Resolution | 32768*32768 |
Responding Speed | <10ms |
Input Method | Finger, any opaque touch such as a brush |
Calibration | 4-point calibration |
Hit Count | Unlimited times |
Touch Pressure | No pressure requirement |
Interface Type | USB 2.0+UATR |
Line length | <25m (greater than 5m, should have an amplifier, greater than 10m with amplifier and power supply) |
Frame Material | Aluminum alloy |
Glass Material | Tempered glass |
Related Characteristics | Easy to install, strong compatibility |
Electrical Specification | |
Scanning Frequency | >100Hz/sec |
Communication Interface | USB 2.0 |
Transfer Speed | 480Mbps |
Power Supply | USB 5V power supply, no external power supply required |
Operating Voltage | 4.75~5.25V |
Working Current | 00mA |
Environmental Specification
| |
Operating Temperature | (-15°C~55°C) |
Storage Temperature | (-0°C~7 5°C) |
Operating Humidity | "10% ~ 90% RH, no condensation" |
Storage Humidity | "10% ~ 90% RH, no condensation" |
Light Resistance | <80000Lux (different infrared tubes are used. The strength is different) |
Electrostatic Level | According to EN 100--00: Level 3. Contact discharge 4K, air discharge 8KV (tested in the whole machine) |
دیدگاه کاربران 0